Tuesday 1/24 Asphalt Modifieds

Chassis: PARMA #577 only. Chassis must be cut to pattern. Wheelbase: 4" (+/- 1/8"). front wheels may spin independently. Must have solid steel axles front and rear. Minimum axle dia. 1/8". Axle holes may be slotted. Bushings may be filed. All cars must have rear bumpers made from 1/8-3/16" channel, square, rectangular, or round brass. All cars must have side bars 1/16" diameter max/brass. Max width of bars is 3-1/4". All bars must be approved. Mo other chassis modifications. No drilling or lighten of chassis. Weight may be added. Chassis clearance is 1/16". Checked with champion tech tool.

Bodies: Approved asphalt type modified body. Bodies available through NJ Slot Spot. No modifications

Axles: 1/8 both front and back NO BALL BEARINGS

Tires:  Any black foam or rubber. All tires MUST TOUCH TRACK. Right Front and Both Rear Tires - Max width is .800min.  Wide .700;
Left Front-Min wide is .500, Max Wide .800. Minimum Diameter is .750 measured inside & outside. Maxiumum Diameter is .875

Motors: The ONLY motor allowed  in these cars will be the FALCON 7. Part #JK30207 ( No Modifications)

European Rotation 2 mins on track, 1 in between lane change

Track clearance will be .062

Max width: 3.250 inches

Motors, front axles, rear bushings, and leadwire may be soldered.

Any guide flag may be used

NERF BARS AND REAR BUMPER MANDATORY

European rotation 2 mins on track 1 in between lane change. NO BRACING OF THE CHASSIS IS PERMITTED!

©2008-2009
All Rights Reserved